Step 4, Step 5, Step 6 – Belkin F1DC116C-US User Manual
Page 14: Step 1, Step 2, Step 3
12
Installation
Step 4
Connect the Belkin Dual-Port Micro-Cable Kit for PS/2 to the desired host ports
on the PRO3 KVM Switch. (Refer to diagram below.)
6
Step 5
Power up your server.
Step 6
Repeat Steps 1 through 5 for each additional PS/2 server you wish to connect.
Connecting Servers to the LCD Rack Console
(USB Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin Dual-Port Micro-Cable Kit for USB (F1D9401-XX), connect the
VGA connector to the monitor port on your server. (Refer to diagram on next page.)
Step 3
Connect the USB connector to an available USB port on the server. (Refer to
diagram on next page.)
This manual is related to the following products: