Philips DCM250-37B - Manual (Page 2)

B A
Note for product
B
Note for product
C
Note for product
Connect
1
3
Connect the other end to the wall socket.
2
Connect one end to the DC socket on the
main unit.
E Tip
• See the User Manual for how to connect
other equipment to this system.
Setup
2
6
Press J/ K to set the minute.
7
Press PROG to confi rm.
Play disc
A
1
Press CD to select the disc source.
2
Insert a disc into the disc compartment
with the printed side facing up.
3
Press 2; to start play.
To stop play, press • 9 .
Enjoy
3
Enjoy
3
Program and tune to radio
stations
C
1
Press TUNER to select the tuner source.
2
Press and hold PROG for 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
All available stations are programmed
in the order of waveband reception
strength.
3
Press J/ K to select a preset number.
Play iPod/iPhone D
1
Install the supplied back plate, and load the
iPod/iPhone in the dock.
2
Press iPod to select iPod/iPhone source.
»
The connected iPod/iPhone plays
automatically.
To pause/resume play, press • 2; .
To skip to a track, press • J / K .
To serach during play: press and hold •
5 / 6 , then release to resume normal
play.
To navigate the menu: press • MENU ,
and press 3 4 J K to select, then press
OK to confi rm.
E Tip
Detailed features and additional functions are
described in the user manual.
Setup
2
Set the clock
A
1
In standby mode, press PROG to activate
the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
2
Press J/ K to select 12 hour or 24 hour
format.
3
Press PROG .
»
The hour digits are displayed and begin to
blink.
4
Press J/ K to set the hour.
5
Press PROG .
»
The minute digits are displayed and begin
to blink.
Play from USB
B
D Note
• Ensure that the USB device contains
playable audio content.
1
Connect the USB device into the socket.
2
Press USB to select the USB source.
»
The total number of tracks is displayed.
3
Press 3 4 to select a folder.
4
Press J/ K to select a fi le.
5
Press 2; to start play.
La
bel side
DCM250_37_QSG_AEN_1.0.indd 5-7 DCM250_37_QSG_AEN_1.0.indd 5-7 2009-1-13 10:52:08 2009-1-13 10:52:08