Philips HD8750-47 - Manual (Page 34)

32 ENGLISH
3 Remove the “INTENZA+” water fi lter (if installed) from the water tank if
it was installed.
4 Remove the water tank and pour the entire content of the Saeco
descaling solution. Fill the water tank with fresh water up to the MAX
level.
5 Place the water tank back into the machine.
7 Press and hold the " " button for 3 seconds. When the button
starts blinking, release it to start the cycle. The " " button blinks
during the whole descaling cycle.
6 Place a large container (1.5 l) under the steam/hot water wand and the
dispensing spout.
8 The steam/hot water wand (" " button permanently on) and the
dispensing spout (" " button permanently on) now start dispensing
the descaling solution.