Philips HD8750-47 - Manual (Page 15)

13 ENGLISH
2 Press the “ ” button to start the cycle. The machine starts the
automatic priming of the circuit by dispensing some water through the
Classic Milk Frother.
3 When the process is complete, the“ ” and “ ” buttons will blink.
The machine is in the warm-up mode.
Automatic Rinse/Self-Cleaning Cycle
When warm-up is completed, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuits with fresh water. This takes less
than a minute.
4 Place a container under the dispensing spout to catch the small
amount of dispensed water.
5 The " " and " " buttons blink during the entire process.
6 Wait for the cycle to fi nish automatically.
Note:
You can stop the dispensing process by pressing either the " " or the " "
button.
7 When the above steps are complete, check that the “ “, " ", " " and
" " buttons are lit.