Philips VRZ255AT99 - Manual (Page 42)

42 Index Search
1
4
2
5
3
When you make a recording, the VCR automatically places an
index code at the beginning of the recording. Essentially, an index
code is a type of “bookmark” for your tape. This feature is useful
if you have several different programs recorded on a single tape.
Fast forward or rewind to the next or previous index code on the
tape by following the steps below.
1
Press the VCR button.
2
Make sure the VCR is in VCR position. (The VCR light will appear
on the display panel when the VCR is in VCR position.) If the
VCR light does not appear, press the VCR/TV button
once.
5
Press the INDEX --’ button to fast forward to the
next index code on the tape. Or, press the INDEX ’;;
button to rewind to the previous index code on the tape.
Wait for the VCR to fast forward or rewind the tape. When the
index code is reached, tape playback will begin automatically.
NOTE: You may press an INDEX button repeatedly to skip over
multiple recordings. For example, if you want to fast forward past
four recordings, press the INDEX --’ button four times.
INDEX 4 will appear in the bottom right corner of the screen.
3
Insert a tape in the VCR.
4
Press the STOP 9 button to stop tape playback, if neces-
sary.
Insert a tape.
• The VCR does not place an index
code at the point where a recording
is paused, then resumed.
• INDEX may flash on-screen briefly
when you begin a recording.
Helpful Hints
1
4
7
SPEED
CBL/DBS
TV VCR
MENU
EXIT/STATUS
TIMER [ REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF /OK
c EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV 7;; INDEX ::7 AUDIO/MUTE
:: ;;
+
–
+
–