Philips VRZ255AT99 - Manual (Page 33)

Setting Up the VCR Plus+ Programming System (cont’d) 33
3
4-7
6-7
8
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that
some stations have VCR Plus+ and Cable/TV channel numbers
that are the same, and other stations have channel numbers that
do not match. You must tell the VCR Plus+ and Cable/TV channel
numbers according to the following steps.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
5
Press the PLAY 8 or STOP 9 button to select VCR
PLUS+ CH., then press the FF :/OK button.
6
While the VCR PLUS+ channel is flashing, press the
PLAY 8 or STOP 9 button repeatedly or press the
Number buttons to select a VCR PLUS+ channel number.
The arrow will appear beside the VCR PLUS+ channel. Press the
FF :/OK button.
8
Press the EXIT/STATUS button.
2 Examine the lists on page 32.
SET VCR PLUS+ CH.
VCR PLUS+ CABLE/TV
99 – – –
01 – – –
02 – – – –> – – –
03 – – –
04 – – –
SELECT ,9 OR ENTER VCR+
CH. NO. THEN PUSH :/OK
TO END PUSH EXIT
7
While the space for the CABLE/TV channel is flashing,
press the PLAY 8 or STOP 9 button repeatedly or press
the Number buttons to enter the CABLE/TV channel
number. Press the FF :/OK button.
Repeat steps 6 - 7 until you have entered all the channels on your
list.
1
4
7
SPEED
CBL/DBS
TV VCR
MENU
EXIT/STATUS
TIMER [ REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF /OK
c EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV 7;; INDEX ::7 AUDIO/MUTE
:: ;;
+
–
+
–