Philips DVD711AT98 - Manual (Page 16)

16 PREPARATION
Preparation
General notes
- Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player. Possible
connections are shown in the following drawings.
Please refer to the manuals of your TV,VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR.The video
quality could be distorted by the copy protection system.
- For better sound reproduction, connect the player’s audio out jacks
to the audio in jacks of your amplifier, receiver, stereo or A/V
equipment. See ‘Connecting to optional equipment’.
Caution: Do not connect the player’s audio out jack to the
phono in jack of your audio system.
Connecting to a TV
Component Video (Y C R C B ) connection
1 Connect the Y, C R , C B , jacks on the DVD-player to the corresponding
jacks on the TV (cable not included) (A).
2 Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV (C).
S-Video (Y/C) connection
1 Connect the S-Video jack on the DVD-player to the S-Video in jack on
the TV using an optional S-Video cable (B).
2 Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV (C).
Video CVBS connection
1 Connect the Video out (CVBS) jack to the video in jack on the TV using
the audio/video cable supplied (C).
2 Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV.
L R
CVBS
VIDEO OUT COAXIAL AUDIO
Y S-VIDEO
OPTICAL
1
DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS 1
2 2
C B C R
MAINS
TV
C B A