Philips 8020X-33 - Manual (Page 7)

ENGLISH
◗ Charging and recharging requires a full 8
hours.
◗ A fully charged razor has a shaving time of up
to 30 minutes.
◗ For hygienic reasons, it is advised that you use
a new shaving conditioner cartridge on your
razor when starting a new shaving conditioner
refill bottle.
Placing or removing razor from
charging stand:
C
◗ Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom
of razor.
C
◗ Always remove razor from stand by lifting
straight up. Do not tilt razor.
◗ Do not leave the charging stand with the
razor in it continuously plugged into outlet
as it would reduce life of batteries. If storing
razor in stand, remove the plug from outlet as
soon as the razor is fully charged.
C
1 Connect the small plug into the charging
stand and put the power plug into any
100v to 240v AC outlet. Use only the
cord and charging stand provided.
2 Charging requires a full 8 hours. A fully
charged razor has a cordless shaving time
of up to 30 minutes.
12 ENGLISH
3 Remove the power plug from outlet as
soon as the battery is fully charged.
filling Razor Cartridge
◗ only use NIvEA FoR MEN Shaving
Conditioner to refill the shaving conditioner
cartridge. Any other lotion may cause damage
to your razor.
C
1 Remove the tab of the NIvEA FoR MEN
Shaving Conditioner bottle (Model HS800).
C
2 Turn the cap on the shaving conditioner
bottle clockwise.
The cap moves down and the shaving conditioner
nozzle appears.
3 Place the nozzle of the conditioner bottle
into the opening of the conditioner
cartridge on the back of the razor.
C
4 Move the bottle up and down
approximately 5 times to pump the shaving
conditioner into the cartridge until you
see that the shaving cartridge is full. Do
not fill the cartridge beyond the MAX
indication.
BE CAREFUL NOT TO OVERFILL SHAVING
CARTRIDGE.
5 Remove nozzle of the shaving conditioner
bottle from shaving conditioner cartridge
13