Philips DC177-37 - Manual (Page 19)

English
19
USB Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUF ................ tracks are played in random
order
REP ALL ........... repeats the programme
REP ................... plays the current track
continuously
1
To select your play mode, press REPEAT/
SHUFFLE on the remote control before or
during playback until the display shows the
desired function.
2
Press
2; to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press REPEAT/
SHUFFLE on the remote control until the
various SHUFFLE/ REPEAT modes are no longer
displayed.
● You can also press 9 to cancel your play mode.
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
Programming track numbers
Programme in the STOP position to select and
store your tracks in the desired sequence. If you
like, store any track more than once. Up to 40
tracks can be stored in the memory.
1
In the stop position, use the н/ л to select
your desired track number.
● For MP3, you may press TUNING а / б
(or ALBUM/PRESET +/- on the remote
control) to select a desired album, then select
your desired track.
2
Press PROGRAM on the remote control to
store.
➜ Display: PROG flashes, and PR 01 is displayed
briefly, then the selected track number.
3
Repeat steps 1-2 to select and store all desired
tracks.
➜ PROGRAM FULL is displayed if you attempt
to programme more than 40 tracks.
4
To start playback of your programme, press 2;.
Reviewing the programme
● Stop playback and press PROGRAM on the
remote control repeatedly.
● To exit review mode, pressÇ.
Erasing the programme
You can erase the programme by:
●
pressing
9 once in the STOP mode;
● pressing 9 twice during playback;
PG 001-026_DC177_37-Eng 2008.2.28, 10:10 19