Philips DC177-37 - Manual (Page 17)

English
17
Radio Reception
Tuning to radio stations
1
Press SOURCE on the set (or FM on the
remote control ) repeatedly until FM is displayed.
2
Press down on TUNING а / б (or S /
T on the remote control) and release the
button.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING а /
б (or
S / T on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press н/ л (or ALBUM/PRESET +/- on
the remote control) to select the preset
number where programming should star t.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM on the remote control for
more than 2 seconds to activate programming.
➜ FM AUTO is displayed and available stations
are programmed in order of waveband
reception strength. The first preset automatically
stored will then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM on the remote control to
activate programming.
➜
PROG flashes in the display.
3
Press н/ л (or ALBUM/PRESET +/- on
the remote control) to allocate a number from
1 to 40 to this station.
4
Press PROGRAM on the remote control again
to confirm the setting.
➜
PROG disappears, the preset number and the
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
● You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
● Press н/ л (or ALBUM/PRESET +/- on
the remote control) until the desired preset
station is displayed.
PG 001-026_DC177_37-Eng 2008.2.28, 10:10 17