Philips 241S4LCB-27 - Manual (Page 12)

10
2. Setting up the monitor
2.4 Remove base stand and base
(241S4LC/241S4LY)
Remove the base stand
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
2. Detach the base stand away from the base
column by:
(1) Use your fingers to loosen the screw
located at the bottom of the base.
(2) Gently move up-and-down to release the
latch that locks the base and pull the base
away from the base column.
Remove the base
Condition:
• For VESA standard mounting applications
1. Extend the monitor base to its maximum
height.
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
3. While keeping the release button pressed, tilt
the base and slide it out.