Instructions for use, Iii iv – Philips SCF260-11 User Manual
Page 6
310
285
255
230
200
170
140
115
85
55
30
ml
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
310
285
255
230
200
170
140
115
85
55
30
ml
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
310
285
255
230
200
170
140
115
85
55
30
ml
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
310
285
255
230
200
170
14
0
115
85
55
30
ml
fl.o
z
11
10
9
8
7
6
5
4
3
2
1
31
0
28
5
255
23
0
20
0
170
14
0
11
5
85
55
30
m
l
fl.o
z
11
10
9
8
7
6
5
4
3
2
1
310
285
255
230
11
10
9
8
325
295
265
240
210
180
150
120
90
60
30
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
325
295
265
240
210
180
150
120
90
60
30
ml
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
BEEP
310
285
255
230
200
170
40
15
85
55
30
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
325
295
265
240
210
180
150
120
90
60
30
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
310
285
255
230
200
170
1
1
ml
310
285
255
230
200
170
1
1
ml
325
295
265
240
210
180
150
120
90
60
30
fl
.o
z
11
10
9
8
7
6
5
4
3
2
1
ml
i
ii
iii
iv
Instructions for Use
1. Ensure that the warmer is placed on a firm level surface.
Open the lid using the front catch, and fill the warmer with the appropriate amount of water (i)
– See chart on page 5 to determine water amount.
Place the fully assembled bottle or nurser (including dome cap to prevent overheating) or
storage container with lid in the warmer. For food jars, please refer to manufacturer’s instructions.
Note: When warming an 11oz/330ml bottle or an 8oz/236ml Tempo, the lid flap will lift to
accommodate the larger size. This will cause a small amount of steam to rise from the warmer.
Close the lid ensuring that the front catch ‘clicks’ shut.
2. Plug in the warmer.
3. Switch on the warmer by holding the Power/Mode Selection Button for 3 seconds (ii).
The warmer will beep, and the milk, room temperature and oz/ml symbols will illuminate.
It is now ready for use. If the lid has not been closed correctly, the symbols will flash.
When the unit is switched on, it automatically defaults to the milk/room temperature mode.
If this is the mode you need, go to step 5. If not, proceed to step 4.
4. Choose milk or food, and select the starting temperature (iii) by pressing the Power/Mode
Selection Button repeatedly until the desired symbols are illuminated.
Please note that there are 6 possible options: milk from room temperature, milk from chilled,
milk from frozen, food from room temperature, food from chilled, and food from frozen.
(See Display Guide on page 5 if needed.)
Note: Warming food jars from frozen is NOT recommended.
Note: Please ensure that the correct options are selected, as milk and food should not be heated
for too long.
5. Select the amount of milk or food in the bottle or container by repeatedly pressing the Volume
Selection/Start Button until the desired volume is illuminated (iv). If the desired amount is not
shown on the display, please select the amount nearest to it.
Note: For volumes in grams, select the same amount in ml (e.g. for 80g select 80ml).
Note: The maximum volume that may be selected when warming food from frozen is 8oz/240ml.
6. Start the warming cycle (v): Once the desired settings are illuminated, hold down the Volume
Selection/Start Button until the warmer beeps. The volume display will now flash ascending and
descending lights up to the selected amount. The warming cycle is in progress –
Do not open the lid.