Changing lcd language, Improving the lcd viewing, Changing lcd language improving the lcd viewing – Brother DCP-135C User Manual
Page 67: Bchanging lcd language
Troubleshooting and Routine Maintenance
59
B
Changing LCD language
B
You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup
.
Press OK.
c
Press a or b to choose
0.Local Language
.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Improving the LCD viewing
B
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup
.
Press OK.
c
Press a or b to choose
2.LCD Contrast
.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
Unusable Device
Please Disconnect
USB Device.
A USB device or USB Flash
memory drive that is not supported
has been connected to the USB
direct interface.
For more information, visit us at
Unplug the device from the USB direct interface.
Error Message
Cause
Action