Philips DC290-37 - Manual (Page 12)

12
3
Press iPhone/iPod to select iPod/iPhone
source.
» The connected iPod/iPhone plays
automatically.
• To pause/resume play, press OK/ .
• To skip to a track, press / .
• To search during play, press and
hold / , then release to resume
normal play.
• To go back to the previous iPod/
iPhone menu, press MENU. To scroll
through the menu, press / . To
confirm a selection, press OK/ .
» If no key is pressed for more than
10 seconds, OK/ acts back as
the play/pause key.
Charge the iPod/iPhone
When the unit is connected to power,
the docked iPod/iPhone begins to charge.
Tip
• For certain iPod models, it may take up to a
minute before the charging indication appears.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
• iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod with color
display, iPod mini.
• iPhone, iPhone 3G, iPhone 3GS.
Listen to the iPod/iPhone
1
Lift up the iPhone/iPod dock on the top
panel.
2
Place the iPhone/iPod into the dock.
EN