Philips MC-I200-37 - Manual (Page 29)

27
English
Tuning to radio stations
1
Press TUNER to select TUNER mode.
➜ "TUNER
TUNER TUNER TUNER TUNER " is displayed. The current radio
frequency will appear on the display.
➜ If an FM station is received in stereo, is
displayed.
2
Press TUNER again to select the desired
waveband : FM or AM.
3
Press and hold
S or T (or а / б on the
remote control) until the frequency indication
starts to change, then release.
➜ The display will show "SEARCHING...
SEARCHING... SEARCHING... SEARCHING... SEARCHING... " until
a radio station with sufficient signal strength is
found.
4
Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press S or T
(а / б) briefly and repeatedly until optimal
reception found.
Storing favorite radio stations
You can store up to 40 favorite radio stations in
the memory. Favorites is always on in Tuner mode.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1
Press TUNER to select TUNER mode.
2
Press and hold FAVORITES until “ “ “ “ “ AUTO AUTO AUTO AUTO AUTO
PROGRAM FAVORITE STATIONS PROGRAM FAVORITE STATIONS PROGRAM FAVORITE STATIONS PROGRAM FAVORITE STATIONS PROGRAM FAVORITE STATIONS? ? ? ? ? ” is
displayed, followed by “YES YES YES YES YES ” and “NO NO NO NO NO ” options.
3 Press the soft key (
@) on the system to select
“YES YES YES YES YES ”.
➜ “AUTO PROGRAM IN PROGRESS...
AUTO PROGRAM IN PROGRESS... AUTO PROGRAM IN PROGRESS... AUTO PROGRAM IN PROGRESS... AUTO PROGRAM IN PROGRESS... ” is
displayed.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets is used, the
last preset radio station will be played.
To stop storing the automatic preset
● Press Ç.
Radio Reception