4 cutter parts, 5 cutter installation, 4. cutter parts – Century Systems CFD-4306 User Manual
Page 18: 5. cutter installation
15
3-4. Cutter Parts
29 Cutter
Module
30 Screw (TAP 3*8) x 2pcs
[NOTE]: Please power off the printer before installing the
cutter module.
[NOTE]: Do not cut self-adhesive labels! The traces of
adhesive will pollute the rotary knife and impair
safe operation!
3-5. Cutter Installation
1.
Open the top cover by
pressing the Cover Open
Buttons on both sides.
2.
Push the front cover piece
buttons inward to open.
3.
Lift/take off the front cover
piece according to the
direction shown in the photo.
This manual is related to the following products: