Philips SPC611NC-37 - Manual (Page 9)

EN
9
> The following screen, including a progress bar, appears.
> The following screen appears when the installation was
successful.
5 Click on 'Finish'.
6 You can now connect your laptop camera.
Note!
The SPC 610NC laptop camera is 'XP Plug & Play'. This means if you
are running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC 610NC PC Camera Driver. Simply plug in the camera and
you can start using your SPC 610NC laptop camera.
Connecting the camera to your laptop
1 Be sure to run the installation CD first, before connecting the
camera to the laptop or notebook.
2 Be sure your laptop or notebook is activated.
3 Connect the USB connector to the USB port of the laptop.
> The camera will now derive its power from the laptop.
Installation