Philips SPC611NC-37 - Manual (Page 10)

EN
10
Putting the camera into operation mode
1 Bend the camera neck into the desired position.
2 Switch on the camera ( ) by sliding the lens cover
(light switch) one click downwards ( ).
> The camera is now in operation mode but will only function
when the applications are started up.
See chapter ‘Using the applications’.
• If desired you can switch on the front light / keyboard light
( ) by sliding the light switch (lens cover) one more click
downwards ( ).
To switch off the front light / keyboard light ( ),
slide the light switch (lens cover) one click upward.
Notes!
– When using the camera be sure to slide the lens cover
(light switch) at least one click downwards ( ).
– When the camera is not in use, be sure to slide the lens cover
(light switch) all the way up (two clicks) to protect the lens.
Installation
1x click
2x click