Philips FWC250 - Manual (Page 12)

3139 115 20353 (ENG)
12
Important:
Before you operate the system,
complete the preparation
procedures.
Plug and Play
The system provides PLUG and PLAY
feature that allows you to store all
available radio stations automatically
upon power up.
If PLUG and PLAY
has been installed beforehand, it
will go to standby or demonstration
mode after five seconds.
1 Press and hold PLAY (on the system
only) for five seconds; when the
system is in standby or
demonstration mode.
• If the PLUG and PLAY has not been
installed before, you can access this
feature by switching on the system
from the main power outlet.
™ “AUTO INSTALL - PRESS
PLAY” will be displayed.
2 Press PLAY to start installation.
™ “INSTALL” will be displayed and
followed by “ TUNER” and then
" AUTO".
™ The PROGRAM starts flashing.
™ PLUG and PLAY will start
searching for all radio stations on
FM band and then followed by
radio stations on AM band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
CONTROLS OPERATING THE SYSTEM
STANDBY-ON
PROGRAM CLOCK•TIMER DIM
MINI HIFI SYSTEM
C D 1 • 2 • 3 FM•AM TAPE 1 • 2
TAPE AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
•
VIDEO
OPTIMAL
JAZZ
ROCK
TECHNO
JOG
CONTROL
SOUND NAVIGATION - JOG VOLUME
D B B
CD TUNER
DEMO STOP
Notes for remote control:
– First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD or TUNER).
– Then select the desired function
( Й, н, л, etc.).
£ SHUFFLE
–
to play all the available discs and
their tracks in random order.
≤ SLEEP
–
to switch the system to standby
mode at a selected time.
∞ B
–
to switch the system to standby
mode.
pg 01-28/C250/37-En 12/6/00, 2:20 PM 12