Philips VRKD12BL - Manual (Page 33)

POWER
CHANNEL
PAUSE
PLAY
STOP
F. FWD
REW
RECORD VCR/TV
SPEED MENU DISPLAY
EXIT/ C. RESET COUNTER MEMORY
Repeat Play 33
Follow the steps below to make the VCR play a tape over and
over. Make sure:
● The VCR is on and is in VCR position. The VCR/TV light will
appear on the front of the VCR. If it does not, press the
VCR/TV button once.
● There is a tape in the VCR.
1
Press the MENU button until the main menu appears.
2
Press the PLAY button or the STOP button repeatedly to
select AUTO REPEAT.
3
Press the F.FWD button so that [ON] appears next to
AUTO REPEAT. Tape playback will begin immediately. AUTO
REPEAT B will appear on the screen briefly.
(If you are fast forwarding or rewinding the tape, you must first
press the EXIT/C.RESET button, then press the PLAY button to
begin tape playback.)
The VCR will play the tape to the end, rewind it, then play it
again. (TV programming will appear on the screen while the tape
is rewinding.)
1
3
2
• To cancel AUTO REPEAT, follow
steps 1-2 above. At step 3, press
the F.FWD button so that [OFF]
appears beside AUTO REPEAT.
Press the EXIT/C.RESET button.
• The COUNTER MEMORY button
does not work if AUTO REPEAT is
set to [ON].
• The real-time counter memory is
cancelled if AUTO REPEAT is set to
[ON].
Helpful Hints
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT
[OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT