Philips MCM276R-37B - Manual (Page 32)

32
English
Appendix
140 mm (5.51")
2
Drill two 6mm diameter holes as marked
3
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
the wall
4
To detach the stand,
a. As shown, hold down the 3 PRESS buttons
b. Move out the stand to detach
PRESS PRESS
5
Hang the unit on the fastening screws
6
As shown, hook and mount the speakers in
place
Speak
er Left
Speak
er R ight
Holes
Main unit
Mounting your MCM276R
1
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown)
How to mount your MCM276R
onto walls
IMPORTANT!
– The wall mounting instructions are for
the use of the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto walls
.
2 x screws
What else you’ll need
– Drilling tools (e.g. electric drill)
Preparation
1
To find a suitable location for mounting, try
your necessary rear connections (see
the chapter Installation).
2
Ask a qualified person to help you with the
wall mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your walls;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
What’s in the supplied mounting kits
140 mm (5.51")
1 x template (Wall
mounting
instructions)
P001-P031_MCM276R_37_Eng 2006.7.26, 15:14 32