Troubleshooting – Philips MCM276R-37B User Manual
Page 31

English
31
The remote control does not function
properly.
The timer is not working.
The Clock/Timer setting is erased.
The menu navigation or photo playback
of the docked player cannot be carried
out through the buttons on MCM276R or
its remote control.
The STOP
9 and some buttons on
MCM276R and its remote control have
no function.
The battery of my Philips GoGear in
dock is drained when it is not used for
playback.
✔
Select the source (CD or TUNER, for example)
before pressing the function button (
ЙЕ,н,
л).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the battery with its polarities
(+/– signs) aligned as indicated.
✔
Replace the battery.
✔
Point the remote control directly toward
IR sensor on the front of the system.
✔
Check the set is switched off
✔
Set the clock correctly.
✔
Press TIMER to switch on the timer.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
The buttons on MCM276R and its remote
control can control playback of audio contents
only. To navigate the menu, use the controls on
the docked player.
✔
The playback of the docked player cannot be
stopped using the STOP
9 button on
MCM276R and its remote control.
✔
The buttons (
2; , ¡1, 2™ and VOLUME )
function only.
✔
The docked GoGear is still comsuming battery.
Power it off if you don’t use the player.
Troubleshooting
P001-P031_MCM276R_37_Eng
2006.7.26, 15:14
31