Philips 64PP9751 - Manual (Page 2)

SOURCE EXIT UP CH
CH DOWN + VOL VOL – M
6
1
12:00
WXYZ WXYZ
EXIT SOURCE
UP
CH
CH
DOWN
+
VOL
VOL
– M
3
2
+ +
+ +
mute
volume
channel
Power
HDR PTV
INFO A/CH 1/5
Sleep
Analog Format
Status Auto
INFO A/CH 2/5
Status
Surf +100
HDR PTV
ok
Exit
Menu
HDR PTV
INFO A/CH 3/5
Source
HDR PTV
INFO A/CH 4/5
Size Position
Swap
Source Freeze
PIP
channel + -
On/Off
HDR PTV
INFO A/CH 5/5
On/Off Info
Blue
Record
GUIDE PLUS+
Select
Green
B
ASIC
TV
AND
P
RONTO
R
EMOTE
C
ONTROL
O
PERATIONS
TV C ONTROLS
Press the POWER
button to turn the HDR PTV
ON. (Green Power Light will
display behind the ON button.)
Press the CHANNEL UP
or DOWN (▼) button to select
the desired TV channels.
3 1
2
• Source - Press to cycle through
the TV available inputs (Antenna
A/B tuners and all external inputs.)
• Menu (M) - Press to display the on-
screen control system for the
selected system. (See the On Screen
Features & Monitor Control
Operation sections in the separate
Owner’s Manual for details on the
use and navigation of the menus.)
• CH Up/Down - With a select Menu
system displayed, press to move
through the list of control features.
• VOL Up/Down - With a select
Menu system control displayed,
press to adjust the on-screen feature.
• Exit - Press to display a Status
screen for the selected Menu sys-
tem, or clear the screen following
Menu feature adjustments.
Infrared Remote Sensor Window
Press the VOLUME (+)
UP or VOLUME (-) DOWN
button to adjust the sound level.
2
LOCAL KEYBOARD FUNCTIONS
Note: You
can press any of the
TV’s front keyboard
buttons to turn the
TV ON, but the
Power button must
be used to turn the
set OFF (from the
TV’s local key-
board).
S MART
H ELP
PRONTO REMOTE CONTROL
S MART H ELP
Volume buttons
Press to adjust the sound level up (+) and down (-).
Channel Scan buttons
Press to scan Up (+) or Down (-) through programmed channel
numbers.
Power button
Press to turn the PTV ON and OFF.
Sleep button
Press to set the PTV to auto-
matically turn itself OFF. (15
minutes to 2 hours ahead.)
number buttons
Press the number buttons to select channels. Press two
number buttons to select single digit “major” channel num-
bers. For example: press "0" then "6" for channel 6.
Exit button
Press to clear the PTV screen after control adjustments.
Also press to see the current channel number on the
PTV screen.
Surf button
Press Surf to select previously viewed channels. With
the PTV’s “Auto Surf” control ON you can place up to
10 channels in memory. Then by pressing the Surf but-
ton you can quickly view the selected channels. (See the
other owner’s manual for details on how to select a
series of channels using the Surf button.)
Analog Format button
Press to select one of the TV screen display format modes
(i.e. Panoramic, 4:3, 16:9, etc.).
Mute button
Press to turn the sound OFF on the PTV. Press again to return the
sound to its previous level.
Status button
Press to see the current channel number on the PTV screen. Also
press to clear the PTV screen after control adjustments.
T he Pronto remote contains five
display screens of TV related
controls. Use the touchscreen to
access and adjust onscreen fea-
tures for Input selection and Menu
feature adjustments.
Note: For battery installation and
other details on the initial use of
the Pronto remote control also
refer to the following page of this
Quick Use guide.
Gently tap the Pronto touch-
screen with your finger to display
its control panel for use.
Be sure “HDR PTV” is selected
for the current device tab item cat-
egory.
Refer to the following page for
further details on Pronto Remote
battery installation and
Touchscreen Display use and oper-
ations.
1
2
Due to the amount of
optional component and
feature uses available with the
Pronto’s Device Reference and
Learn Code lists, please also refer
to the separate full-use Pronto
Owner’s Manual for complete
details on its function and opera-
tions.
Auto button
Press to select from a list of Auto controls.
Auto Picture for preset levels set for different
types of viewing sources and programs. Auto
Sound to control sound levels during pro-
gram changes or commercial breaks. Auto
Surf to quickly select up to 10 channels. See
the “Auto Features” section in your other
owner’s manual for details.
Status button
Press to see the current channel number on the PTV screen.
Also press to clear the PTV screen after control adjustments.
Source button
Press to quickly select Auxiliary source inputs on the PTV
(AUX1 VIDEO; AUX2 VIDEO; etc.), as well as Antenna
A/B inputs on the PTV.
100+ button
Press to select channel numbers above 99. Example:
press +100; 2; 3 for channel 123.
menu buttons
Press the Menu (or ok) button to show on-screen controls.
Press ok ▲ or ▼ buttons to move up (or down), the ok
ᮤ
or ᮣ to move left (or right) through the list of controls.
PIP buttons
Press to operate Picture-In-Picture features. See “PIP”
section in your other owner’s manual for details on to
show two TV programs on screen at the same time.
Guide Plus+® buttons
Press to use the GUIDE Plus+ electronic guide for TV
program listings and information. Refer to your sepa-
rate GUIDE Plus+ information manual for setup and
use details.
scroll arrows
Press to move to the next (or
previous) page of Pronto
controls. The touchscreen
will display the current con-
trol screen’s page number,
and the total number of pages
available for the selected
device (1/5; 2/5; etc.)