Breville AF6 - Manual (Page 9)

9
CHANGING THE BRITA MAXTRA FILTER CARTRIDGE
The filter cartridge will need to be
changed approximately once per month.
1. Switch the water filter/chiller off and
disconnect from the mains supply.
2. Using the dispenser, (as described
in Cleaning and Maintenance on
page 10) completely drain the water
from the tanks.
3. Remove the upper water tank cover.
4. Pull the BRITA MAXTRA filter cartridge
out of the unit and discard it.
5. Wash the lid and tanks in warm
soapy water, rinse and dry thoroughly.
6. Remove the new BRITA MAXTRA filter
cartridge from its wrapping.
✎ ✎ ✎ ✎ ✎ NOTE
The cartridge and inside wrapper may
be moist - this is simply condensation.
✎ ✎ ✎ ✎ ✎ NOTE
Always make sure you have spare
cartridges to hand. When buying
cartridges look for the BRITA MAXTRA
symbol on the cartridge packaging to
find the correct filter cartridge in store.
7. Follow the instructions in “Preparing
the Filter Cartridge” on page 5.
8. Insert the BRITA MAXTRA filter
cartridge into its receptacle in the
upper water tank.
9. Replace the upper water tank lid.
10. Restart the BRITA Memo system as
described in “Using the BRITA Memo
Function” on page 8.
11. Lift the hinged lid and refill the tanks.
12. Close the hinged lid.
13. Plug the unit into the mains and press
the chiller ON/OFF switch on the front
of the unit and wait for the water to
chill.