Registering, Register a new handset to base station, Unregister a handset – Philips VOIP4332B-37 User Manual
Page 35: Select the base station, Other features

35
US
Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. In idle mode, press MENU.
2. Press UP / DOWN
to select SYSTEM, and then press OK.
3. Press UP / DOWN
to select REGISTER. Press OK.
4. Long press
on the base for 4 seconds.
Unregister a handset
A handset can unregister another handset registered to the same base. It can also un-register itself.
1. In idle mode, press MENU.
2. Press UP / DOWN
to select SYSTEM, and then press OK.
3. Press UP / DOWN
to select DELETE HS. Press OK.
4. Press UP / DOWN
to select the handset you would like to un-register and press OK.
5. Press OK again to confirm.
Select the base station
If your handset is registered to more than 1 base, you can select which base the handset will use.
1. In idle mode, press MENU.
2. Press UP / DOWN
to select SYSTEM, and then press OK.
3. Press UP / DOWN
to select BASE SELECT. Press OK.
4. Press UP / DOWN
to select the base to use and press OK.
Note : If the base is full, the base would not go into registration mode. See the section “Unregister a
handset”, page 35 to unregister a currently registered handset.
Other features