Philips 46PFL3608-F7 - Manual (Page 17)

17 English
The following video signals can be displayed:
Other formats or non-standard signals will not be displayed correctly.
* 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 /
39PFL2608 only.
USB Memory Stick
This unit offers easy playback of picture (JPEG), music (MP3) and video
files.
Insert the USB Memory Stick into the USB terminal shown below.
USB ➟ p.24
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA
1,280 x 768
1,360 x 768
FHD* 1,920 x 1,080
Note
• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
– Attach a ferrite core to the AC power cord of your PC.
– Unplug the AC power cord and use the built-in battery of your PC.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Note
• The unit recognizes only a USB Memory Stick.
• Do not use a USB hub or an extension cable to connect an external hard disk drive to
the unit. (Not supported.)
• A USB Memory Stick is always inserted to this unit directly.
• A USB Memory Stick is not supplied with this unit.
• We do not guarantee that all USB Memory Sticks can be supported by this unit.
• Be sure to keep a backup copy of the original files on your device before you play
them back on this unit. We have no responsibilities for damage or loss of your stored
data.
• To protect your USB Memory Stick files from being erased place the write protect
sliding tab in the protect position.
• When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
• A USB Memory Stick that requires its own driver or the device with a special system
such as fingerprint recognition are not supported.
• This unit is not allowed to use the USB Memory Stick which requires an external
power supply (500mA or more).