Philips 55PFL5705DV-F7 - Manual (Page 41)

40 EN
Connecting a set-top box via a composite connector and
analog audio
RF IN
AUDIO L/R + VIDEO AUDIO L/R + VIDEO
OUT
IN IN IN
AUDIO L/R + VIDEO
Cable Cable
Set-top box Set-top box
Note
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on the TV.
Connecting the TV to the internet using an Ethernet cable
LAN
LAN WAN
5 4 3 2 1
Hub or Hub or
broadband router broadband router
Telecommunications Telecommunications
equipment (modem, etc.) equipment (modem, etc.)
Ethernet cable Ethernet cable
Ethernet cable Ethernet cable
Internet Internet
Note
• Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
• After connecting an Ethernet cable, set up necessary network settings. (For the
network setup, refer to ‘Network’ on page 30.)
• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the Ethernet port of this unit.
EN
Connecting the TV to the internet using a USB wireless
LAN adapter
LAN
WAN
Wireless LAN Wireless LAN
Access Point (AP) Access Point (AP)
(e.g. wireless router) (e.g. wireless router)
Network equipment Network equipment
(modem, etc.) (modem, etc.)
Ethernet cable Ethernet cable
Internet Internet
USB wireless USB wireless
LAN adapter LAN adapter
Note
• After connecting a USB wireless LAN adapter, set up necessary network settings.
(For the network setup, refer to ‘Network’ on page 30.)
• This unit is compatible with the supplied USB wireless LAN Adapter only.
(Commercially available USB wireless LAN adapters are not supported.)
• Do not insert the supplied USB wireless LAN adapter when the unit is turned on.
Please insert the USB wireless LAN adapter when the unit is in the standby mode or
turned off.
• Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE
802.11 b/g/n.
(n is recommended for stable operation of the wireless network.)
• This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network
connection.
• Do not use an extension cord and USB Hub to connect devices to this unit. Always insert
the USB fl ash memory or the supplied USB wireless LAN adapter in to this unit directly.
Connecting a digital home theater amplifi er using a
digital audio coaxial cable
digital home theater amplifi er digital home theater amplifi er
DIGITAL AUDIO
IN
OUT OUT OUT
Note
• Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over
Digital Audio Output for certain channels, shows or segments during the broadcast.