Philips 15 inch CRT Monitor - Manual (Page 7)

6
Front Panel Control
• Power Switch: Press this knob to switch ON/OFF of monitor’s power.
• MENU
: Active OSD menu or function adjust confirm.
• Contrast / : Adiust contrast or function adjust.
• Brightness / : Adjust brightness or function adjust.
•
EXIT: Press the EXIT key to inactive OSD menu.
• Power Indicator:
Green — Power On mode.
Orange —
Off mode.
How to adjust a setting
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
100
H: 31.4KHz V: 70.0Hz
Contrast
9300 6500
720 × 400
Figure 4 The OSD Message
Note: If adjustment or selection of any OSD menu is not made for more
than 10 seconds, the current setup will be saved and the OSD will disappear
automatically.