Philips DVDR3505-37 - Manual

This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only
be recorded to once. DVD+RW/DVD-RW can be recorded to and erased many times.
• Following discs are recommended for good recording quality and are proven to be
compatible with this unit. However, depending on the media condition the unit may
not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x,
JVC DVD-RW 4x,
Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x,
SONY DVD+R 4x/8x/16x, DVD+RW 4x,
TDK DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players without finalizing. However, if
you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to
see those effects on other units (see page 83 in the user manual). To play back discs other than DVD+RW on other DVD players,
you will need to finalize.
• DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (see page 82 in the
user manual).
• DVD-R recorded in the mode other than +VR is not recordable on this unit.
1 Connections
Follow to the back side of this sheet.
This unit is compatible to play back
the following discs / files.
is a trademark of DVD
Format/Logo Licensing
Corporation.
Logo Attributes
DVD+RW DVD+R
DVD-RW DVD-R
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
The number inside the globe refers to region of the world.
This unit can play back DVDs that are labeled for ALL regions or for region 1.
R e g i o n C o d e s
R e c o r d a b l e D i s c s
DVDR3505/37
DIGITAL VIDEO DISC RECORDER WITH DIGITAL TUNER
CD-RW/-R
DVD+RW/+R
DVD-RW/-R
CD-R
CD-RW
DVD-video
DVD+RW
DVD+R
CD-RW/-R MP3
Windows Media™ Audio
CD-DA
JPEG
DivX®
DVD+R Double Layer
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
CD-DA (audio CD)
video CD
Logos Playable discs Logos Playable discs
Media Playable files
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
AUDIO IN VIDEO IN CHANNEL TO TV ANT. IN R L 4 3 rear of your TV
rear of this unit
IN
IN OUT OUT
VIDEO OUT Y
PR/CR
PB/CB
R
L
R
L
VIDEO IN
S-VIDEO S-VIDEO ANTENNA COAXIAL
HDMI OUT
AV IN AV OUT COMPONENT VIDEO OUTPUT DIGITAL AUDIO OUTPUT PCM / BITSTREAM rear of your
RF modulator
(not supplied)
ANT. IN
VHF / UHF
antenna
cable TV
company
or
RF coaxial cable
RCA video cable
RCA audio cable
Set channel 3 or 4
RF coaxial cable
RF coaxial cable
B a s i c C o n n e c t i o n
Connection Using RF Modulator
1) Disconnect the power cord of your TV from the AC outlet.
2) Disconnect RF coaxial cable from antenna input jack of your TV.
3) Make the connection as illustrated below.
4) Plug in the power cords of the devices to the AC outlet.
IN
IN OUT OUT
VIDEO OUT Y
PR/CR
PB/CB
R
L
R
L
VIDEO IN
S-VIDEO S-VIDEO ANTENNA COAXIAL
HDMI OUT
AV IN AV OUT COMPONENT VIDEO OUTPUT DIGITAL AUDIO OUTPUT PCM / BITSTREAM
VHF / UHF
antenna
cable TV
company
or
rear of your TV
RCA video
cable
RCA audio
cable
RF coaxial cable
RF coaxial
cable
This connection is
for TV loop
through only AUDIO IN L R VIDEO IN
ANT. IN
Connection to a Cable / Satellite Box
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
rear of your TV
cable/satellite
box
or
satellite
dish
cable TV
company IN
IN OUT OUT
VIDEO
OUT
R
L
VIDEO IN
S-VIDEO S-VIDEO ANTENNA COAXIAL
HDMI OUT
AV IN DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
IN
OUT
ANTENNA IN OUT
VIDEO OUT Y
PR/CR
PB/CB
R
L
R
L
VIDEO IN
S-VIDEO S-VIDEO AV IN AV OUT COMPONENT VIDEO OUTPUT
IN
VIDEO OUT
R
L
R
L
VIDEO IN
S-VIDEO AV IN AV OUT
AUDIO IN L R VIDEO IN
ANT. IN
RF OUT ANT. IN
AUDIO OUT L R VIDEO OUT S-VIDEO OUT
This connection is for
TV loop through only
RF coaxial cable
RF coaxial cable
RCA video cable
RCA
audio
cable
RCA
video
cable
RCA audio cable
S-video cable
or
e.g.)
3) Plug in the power cords of the devices to the AC outlet.
* Refer to the user manual for other connection methods.
Unrecordable Discs
Q Quick
uick S
Start tart G
Guide
uide
Q Quick uick S
Start
tart G
Guide
uide
P l a y a b l e D i s c s
Finding the Viewing Channel
1) Press [STANDBY-ON y] to turn on the unit.
2) Turn on your TV. If connected to your VCR, make sure it is switched off or in standby mode before proceeding.
3) Press “2” on the TV’s remote control, then press channel down button repeatedly until you see the “Initial
Setup” menu. This is the correct viewing channel (external input channel) for the recorder. For some TVs,
there may be a button on the TV’s remote control that accesses the external input channel. It may be labeled
“SOURCE”, “AV”, or “SELECT”. In such case, press it repeatedly.
E7H40UD_EN_QG_v2.indd 1 E7H40UD_EN_QG_v2.indd 1 2008/06/02 15:59:22 2008/06/02 15:59:22