Philips VRX364AT - Manual (Page 52)

52 Hi-Fi Stereo Sound System
1
Press the VCR button, then press the MENU button.
2
Press the Number 2 button to select VCR SET UP.
3
Press the Number 3 button to select AUDIO OUT.
Multi-Channel Television Sound System broadcasts are automati-
cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes
recorded in Hi-Fi stereo, however, you’ll need to follow the steps
below.
4
Press the Number 1 button to select HIFI. ON will appear to
the right of HIFI on-screen.
5
Press the STATUS/EXIT button to exit.
TO SELECT PUSH NO. SHOWN
1 HIFI ON
2 MONO
TO END PUSH EXIT
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY OFF
2 ON SCREEN MODE
3 AUDIO OUT
4 LANGUAGE
5 VCR PLUS+ REF. MAP
TO END PUSH EXIT
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded
in Hi-Fi stereo.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps 1 - 3
above. At step 4, press the Number
2 button to select MONO. Press
the STATUS/EXIT button to exit.
HIFI will disappear from the status
display.
• If you play non-Hi-Fi tapes while the
VCR is set to HIFI, HIFI will disap-
pear from the status display and the
tape will play in monaural sound.
See page 55 for more hints.
Helpful Hints
TO SELECT PUSH NO. SHOWN
1 HIFI ON
2 MONO
TO END PUSH EXIT
1 2 3
4 5 6
7 8 9
0 +100
POWER EJECT
SLOW
PAUSE/STILL
STATUS/EXIT CLEAR
MENU
SPEED
REC/OTR
VCR TV CBL/DSS MUTE
VOLUME
CHANNEL
VAR. SLOW VCR/TV TIME
SEARCH
VCR PLUS+
/ENTER
JOG&
SHUTTLE
MEMORY
PLAY
REW – +
STOP
F.FWD
1
4
2
5
3