beautypg.com

Helpful hints – Philips VRX364AT User Manual

Page 41

background image

Timer Recording With the VCR Plus+ Programming System (cont’d) 41

• To exit the VCR Plus+ programming

system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the TV screen.

• If the preset time for a timer

recording comes up during an OTR,
the OTR has priority.

• To stop a started timer recording,

press the STOP/EJECT button on
the VCR.

• If the power fails for more than one

minute, programmed timer record-
ings may be lost. Reset the clock
before re-programming the timer
recordings.

• If you are using a Cable Box/DSS

Receiver, timer recordings are pro-
grammed differently. See page eight
for details.

See page 54 for more hints.

Helpful Hints

5

Press the Number 1 button to record in SP speed, the
Number 2 button to record in LP speed, or the Number 3
button to record in SLP speed.
Your selection will appear to
the right of REC SPEED on-screen, although SP=1 LP=2 SLP=3 will
continue to flash. For details about tape speed, see pages 36 and
56. You cannot use the (Tape) SPEED button at this time.

The VCR must be off for a

timer recording to take

place! Make sure there is a

tape in the VCR.

6

Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. After three seconds, the on-screen
display will disappear.

7

Press the POWER button to turn off the VCR power. The
Timer light will appear. The Timer light will flash if there is not a
tape in the VCR.
If the timer recording will take place several hours or days from
now, you may use the VCR until time for the recording. Just turn
off the VCR a few minutes before the recording starts.
The VCR must be turned off for a timer recording to take
place.
If you forget to turn off the VCR, PLEASE TURN OFF
VCR FOR TIMER RECORDING flashes on your TV screen two
minutes before a timer recording starts. You can remove the mes-
sage by pressing the CLEAR button.

ONE TIME PROGRAM

PROGRAM

1

CHANNEL

09

TIME ON

10:30 PM

TIME OFF

11:30 PM

REC SPEED

SLP

SP=1 LP=2 SLP=3

START DATE

10/10/97
FRI.

TO END PUSH EXIT

1

2

3

4

5

6

7

8

9

0

+100

POWER

EJECT

SLOW

PAUSE/STILL

STATUS/EXIT

CLEAR

MENU

SPEED

REC/OTR

VCR

TV

CBL/DSS

MUTE

VOLUME

CHANNEL

VAR. SLOW

VCR/TV

TIME

SEARCH

VCR PLUS+

/ENTER

JOG&

SHUTTLE

MEMORY

PLAY

REW

+

STOP

F.FWD

7

5

6