B&K Precision 1735A - Manual - Manual (Page 7)

7
SPECIFICATIONS
OUTPUT VOLTAGE: 0 to 30VDC, coarse and fine
adjustment.
OUTPUT CURRENT:
0 to 3A, coarse and fine adjustment.
CONSTANT VOLTAGE OPERATION
Voltage Regulation
Line (108-132 V):
0.01% + 3mV.
Load (no load to full load): 0.01% + 3mV.
Recovery Time:
100 µs typical.
Ripple Voltage
Peak-to-Peak:
2mV, typical
RMS: 1mV.
Temperature Coefficient
(0° to +35 °C): 300 PPm/°C
CONSTANT CURRENT OPERATION
Adjustable Current Limits:
5% to 100%
Current Regulation
Line (108-132 V): 0.2% + 3mA
Load 0.2% + 3mA
Current Ripple:
3mA typical.
METERING
Voltmeter
4 digit Green LED Display
Range: 0 to 99.99 V.
Accuracy: (0.5% + 9 digits)*.
Ammeter
4 digit Red LED Display
Range: 0 to 9.999A.
Accuracy: (0.5% + 9 digits)*.
(* = see note 1 at end of specifications)
POWER REQUIREMENTS:
Domestic: 120 VAC ±10%, 60 Hz
International: 120/220/230/240 VAC - 10%, 50/60 Hz
POWER CONSUMPTION:
Approximately 180W or less at
full load.
PROTECTION:
Reverse polarity protection,
Current limiting.