Philips DVP1013-37 - Manual (Page 12)

E
ng
li
sh
12
Connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connecting to television
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
A Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
C Proceed to page 19 for detailed
progressive scan setup.
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
A Use the composite video cable (yellow)
to connect the DVD player’s CVBS jack
to the video input jack (or labeled as A/V
In, Video In, Composite or Baseband) on
the television (cable supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
AUDIO IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT VIDEO IN
AUDIO
OUT V (Pr/Cr) U (Pb/Cb) Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
2 1
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT V (Pr/Cr) U (Pb/Cb) Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
2
1
01-41_dvp1013_37_eng1.indd 12 01-41_dvp1013_37_eng1.indd 12 2007-03-19 10:39:42 AM 2007-03-19 10:39:42 AM