Philips VRX562AT - Manual (Page 21)

CBL/DSS VCR TV
PAUSE /STILL
POWER VCR PLUS+
/ENTER
F.ADV SLOW
STATUS/EXIT CLEAR
MENU
VOL CH
1
4
7
100
2
5
8
0
3
6
9
A.CH
REC/OTR
SPEED
INDEX SEARCH SKIP SEARCH VCR/TV
MEMORY
EJECT X2 PLAY VAR.SLOW TRACKING
TIME SEARCH REC END SEARCH MUTE
JOG & SHUTTLE
C
C
V
V
• Although the remote control that
comes with your VCR will work most
Cable Boxes and Satellite Systems, it
is possible that the remote control will
not operate your Cable Box or
Satellite System.
• The remote control may only operate
some features of your Cable Box or
Satellite System. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
• If you can not change the channels
at the Cable Box by using the
Number buttons, press the VCR
PLUS+/ENTER button after you
press the Number buttons. It may
change channels at the Cable Box.
• If you had to program the remote
control to operate your Cable Box or
Satellite System here, whenever you
replace the batteries in the remote
control, you will have to program the
remote control again.
Helpful Hints
HAMLIN . . . . . . . . .21, 22
JERROLD . . . .01, 02, 03,
. . . . . . . . .04, 05, 06, 07
OAK . . . . . . . . .16, 17, 18
PANASONIC . . . . .19, 20
PIONEER . . . . . . . .11, 12
SCIENTIFIC
ATLANTA . . . . .08, 09, 10
TOCOM . . . . . .23, 24, 25
ZENITH . . . . . .13, 14, 15
Setting the Remote to Operate a Cable Box/Digital Satellite System 21
4
Within 30 seconds after releasing the MUTE button, press and
release the CBL/DSS button.
3
Press and release the MUTE button.
5
Within 30 seconds after releasing the CBL/DSS button, use the
Number buttons to enter the two-digit code for your Cable
Box or Satellite System. For example, if you have a Zenith Cable
Box, press Number buttons 1, 3.
Your VCR remote control may operate your Cable Box or
Digital Satellite System. If the remote control doesn’t operate
your Cable Box or Satellite System now, follow the steps below
to program your remote control.
1
Point the remote control at your Cable Box or Satellite System and
press the CBL/DSS button. Then, press the POWER but-
ton. If your Cable Box or Satellite System turns on or off, try the
other Cable Box/Satellite System buttons (see pages 23 - 25). If your
Cable Box or Satellite System doesn’t turn on or off, or if the other
buttons don’t work, go to step 2.
2
Find the brand of your Cable Box or Satellite System on
the list below, and remember the two-digit number to
the right of it.
6
Try step 1 again. If the remote control works your Cable Box
or Satellite System, you’re finished. If the remote control still
doesn’t work your Cable Box or Satellite System, repeat steps 2 -
5, using a different code.
There is no guarantee that the
remote control will work your
Cable Box or Satellite System.
CABLE BOX CODES
2 Find your Cable Box/Satellite
System code.
3
4
5
MAGNAVOX . . . . .26, 27 RCA . . . . . . . . . . . . . .28
SATELLITE SYSTEM CODES
1
&
6