Philips MC145-37 - Manual (Page 15)

15
English
MC138/17 English issue 1
CD Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
REPEAT ............ plays the current track
continuously
REPEAT ALL ... repeats the entire disc/
programme
SHUFFLE ......... tracks of the entire disc are
played in random order
1 To select your play mode, press PLAYMODE
(SHUFFLE or REPEAT on the remote
control) before or during playback until the
display shows the desired function.
2 Press
2; to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press
PLAYMODE (SHUFFLE or REPEAT on
the remote control) until the various SHUFFLE/
REPEAT modes are no longer displayed.
● You can also press STOP 9 to cancel your play
mode.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1 Press ¡1 or 2™ to select your desired track
number.
2 Press PROG.
➜ Display shows: the selected track number.
PROG flashes and 1 Pr appears briefly.
3 Repeat steps 1-2 to select and store all desired
tracks.
➜FULLis displayed if you attempt to
programme more than 20 tracks.
4 To start playback of your disc programme, press
2;.
Notes:
– If you wish, you can add further tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.
– Display shows NOSE if there is no track
selected.
Erasing the programme
You can erase the programme by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
● opening the CD compartment;
● Select another sound source
➜
PROG disappears from the display.
p001-024 MC145_37_Eng 6/2/06, 10:29 15