Philips 20PT6446-37B - Manual (Page 5)

5
75
75‰
L
R S-VIDEO
VIDEO
AUDIO
CVI AV out
Y
Pb
Pr
AV in
1
Back of TV
Cable signal
coming from
Cable Company
Jack Panel Back of TV
75
1
2
75‰
L
R S-VIDEO
VIDEO
AUDIO
CVI AV out
Y Pb
Pr
AV in
Antenna Connection
300 to 75 Ω
Adapter
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Twin Lead
Wire
Round Cable
75 Ω
Back of TV
Direct Cable Connection
75 Ω Round
Coaxial Cable
BASIC ANTENNA AND CABLE CONNECTIONS
After using the Auto Program Control, press the
CH+ and - buttons to scroll through all the chan-
nels stored in the television’s memory.
H
ELPFUL
H
INTS
1
If your Cable TV signal or Antenna signal
is a round cable (75 ohm) then you are ready
to connect to the TV.
If your antenna has flat twin lead wire
(300 ohm), you first need to switch the antenna
wires to the screws of a 75 ohm adapter.
If you have a Cable Converter Box :
Connect the Cable TV signal to the Cable
Signal IN(put) plug on the Converter.
2
Connect the Cable TV cable or Antenna cable
(or 300 to 75 ohm adapter) to the 75 plug on
the TV.
If you have a Cable Converter Box : Connect
the OUT (put) plug from the Converter to the
75 plug on the TV.
Y
our home
YY
’s signal input might come from a single (75 ohm) round cable, a converter box or from an antenna. In
either case the connection to the TV is very easy.
YY
Ω
Ω