Philips 20PT6446-37B - Manual (Page 30)

30
1
Press one of the pre-programmed COLORED
buttons on the remote control (Red, Green,
Yellow or Blue). The screen will display a
Yellow Yellow
SMILEY with the first programmed
SMILEY SMILEY
channel for that surf list.
2
While the colored SMILEY SMILEY SMILEY STILL appears
on the screen, press the same COLORED
button on the remote control to tune to the
second channel programmed for that surf list.
3
Pressing the same COLORED button
while the SMILEY appears will tune
SMILEY SMILEY
all the programmed channels. Pressing the
COLORED button again will return you to
the first channel in the list.
After the SMILEY disappears from the SMILEY SMILEY
screen and the same COLORED button is
pressed, the surf channels will be displayed
starting with the FIRST programmed channel
again.
4
Repeat steps 1 - 3 for the other three
COLORED buttons (Surf list) if desired.
5
Pressing the FROWNIE button on the
remote control while the SMILEY appears
with the channel number will allow you to
remove it from the surf list (see previous page
for more details).
QUADRASURF
T
he QuadraSurf
T T
buttons on the remote control allow you to store up to 10 channels per button (40 in total). You
can program the AV input channels for each button making them a “source” button.
T T
Assuming channels have been added to the four Quadra Surf lists (the four colored buttons, see previous page).
or Blue). The screen will display a
with the first programmed with the first programmed with the first programmed with the first programmed
appears will tune appears will tune appears will tune appears will tune
disappears from the disappears from the disappears from the disappears from the
appears appears appears appears
button on the button on the button on the button on the
10
12
18
22
28
35 39
41
56
99
12 Remove Item? - Press
VOL
QUADRASUFR
SMILEY FROWNIE
5
12
VOL
(ALTERNATING CHANNELS)
Y
our remote control has an
YY
A/CH (Alternate Channel) button which allows you toggle between the current channel
you are watching and the previous channel.
YY
A/CH
1
Press A/CH on the remote control to toggle
between the current and previous channel.