Philips SHB9100-00 - Manual (Page 9)

7 EN
4 Use the headset
Connect the headset to a
mobile phone
1
Turn on your mobile phone.
2
Press and hold to turn the headset on.
» The blue LED flashes.
» The headset is reconnected to the last
connected device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone or its Bluetooth
feature after turning on the headset, connect the
headset from the Bluetooth menu on your mobile
phone.
Automatic power saving
If the headset fails to connect any Bluetooth
device within range in five minutes, it powers
down automatically to save the battery life.
Use your headset
Task Operation Sound
or LED
Indicator
Turn the
headset on.
Press and
hold for
more than 4
seconds
1 short beep
- 3 white
flashes:
Battery low <
25%
- 2 white
flashes:
Battery level
< 50%
- 1 blue flash:
Battery level
> 50%
Turn the
headset off.
Press and
hold for
more than 4
seconds
- 1 long beep
- 1 long white
flash
Play or pause
music.
Press 1 short beep
Pick up or
terminate a
call.
Press 1 short beep
Reject a call. Press and
hold
1 short beep
Redial the last
number.
Press
twice
1 short beep
Switch caller
in a call.
Press
twice
1 long beep
Transfer a
call to your
mobile phone.
(This function
is available if
your mobile
phone
supports this
feature.)
Press
and hold
for
more than 4
seconds
1 long beep