Philips SB2000B-37 - Manual (Page 6)

6 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Note
• Before use, fully charge the built-in battery.
1
Open the protective lid.
2
Connect the USB cable between
• the micro USB socket on the speaker,
and
• a USB socket on your computer.
Battery indicator
The LED indicator beside the button
indicates the battery status.
Indicator Battery
Solid red Under charging
Off Fully charged
5V A
Power on/off
Press to power it on or off.
Note
• If the USB cable is connected to the micro USB socket,
this product does not automatically power off. To save
battery power, disconnect the USB cable or manually
power off the product after use.
• In Bluetooth mode, if there is no Bluetooth connection
or no audio is streamed to this product for 15 minutes,
this product automatically powers off.
Use the auto sensor
An auto sensor is integrated in this product.
You can adjust the direction of this product to
power it off easily.
1
Switch the slider to ON to enable the auto
sensor.
OFF ON ON
OFF ON