Philips RI9833-47 - Manual (Page 19)

• 19 •
English
Remarks on Descaling
The previous section explains the correct
operations to perform to descale the
machine.
The machine you have purchased is equip-
ped with advanced software to check the
quantity of used water in order to provide
reliable information about the right time
to carry out descaling operations.
This software has been programmed for
standard water hardness.
In case of especially hard water (high
calcium content), descaling cycles might
have to be carried out more frequently,
even if the machine does not display war-
ning signals.
Even if the machine is not used often (e.g.
1 coffee per day), it is recommended to
perform descaling cycles more frequen-
tly.
In these specific cases, it is recommended
to perform descaling cycles every 1-2
months, even if the machine does not
signal it.
22 Hold the “ “ button pressed for
6 seconds to reset the machine and
cancel the descaling alarm signal.
The light “ ” turns off .
The descaling cycle is complete. Then, the
products can be brewed.
If the machine is switched off
during the descaling cycle,
next time the machine is switched
on the cycle must be repeated from
the beginning.
The descaling solution must
be disposed of according
to the manufacturer’s instructions
and/or regulations in force in the
country of use.
After completing the desca-
ling cycle, wash the brew
group as described in the “Brew
Group” section in the “Cleaning and
maintenance” section.
Reassemble the external part of the Pan-
narello.
Steady on