Philips CCC194AT99 - Manual (Page 21)

• Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
• The remote control may only operate
some features of your Cable Box or
DBS. For example, some Cable Boxes
may only be turned on at the Cable
Box. Therefore, the remote control
will not turn on the Cable Box.
• Press the CABLE/DBS button before
pressing any buttons to operate the
Cable Box/DBS.
• If you had to program the remote
control to operate your Cable Box or
DBS here, whenever you replace the
batteries in the remote control, you
will have to program the remote con-
trol again. Write down the code you
used for future reference.
Helpful Hints
5
Within 30 seconds, press the Number buttons to enter
the two-digit code for your Cable Box/DBS. For example, if
you have a Zenith Cable Box, press Number buttons 0, 7.
6
Repeat step 1. If the remote control works your Cable
Box/DBS, you’re finished. If the remote control still doesn’t work
your Cable Box/DBS, repeat steps 2-5, using a different code for
your brand, if available.
There is no guarantee
that the remote control
will work your Cable
Box or DBS.
Setting the Remote to Operate a Cable Box/DBS (cont’d) 21
POWER
EJECT
SPEED MEMORY
CABLE
/DBS COMBI
SMART
PICTURE
SLOW F.ADV
INDEX SKIP
SLEEP/
WAKE UP
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
ENTER
SEARCH
VAR.SLOW
MENU STATUS
/EXIT FM CLEAR
6
5