Philips MC303799 - Manual (Page 18)

18
English
3140 115 2xxx1
Clock/Timer
TUNING CLOCK SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF PROGRAM
REPEAT
REV MODE/ BAND
STANDBY-ON
RECORD
M C - 3 0 M I C R O S Y S T E M
iR
FWD б/л
REW а /н
PRESET
STOP PLAY•PAUSE
Setting the clock
1 In standby, press CLOCK.
➜ The clock digits for the hours flash.
2 Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting TIMER
¶ The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
¶ You can also use it to record a favorite tuner
program at a set period (REC TUN, see TAPE
RECORDER)
¶ During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER ON•OFF for more
than 2 seconds.
2 Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE
or
REC TUNER.
3 Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
, or RECORD is
shown.
Display sequence scrolls
SET ON TIME and
flashes. The clock digits for the hours flash.
4 Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
5 Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6 Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
7 Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
¶ In standby or during playback, press TIMER
ON•OFF on the system once (TIMER on the
remote control).
➜ Display shows
if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
¶ Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence:
60, 45, 30,15,
SLEEP OFF, 60... if you have selected a time.
Once SLEEP is activated,
SLEEP ON scrolls
across the display at repeated intervals.
¶ To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
TUNER APE
SLEEP UX
SC INC. SURR
pg 001-021/MC30/37-Eng 12/8/00, 9:09 AM 18