Braun ThermoScan Pro3000 - Manual (Page 9)

9
Memory mode
The last temperature taken before the thermometer powers down is
stored in memory. To enter the memory mode, press the
/mem
button.
The last stored temperature is displayed along with the MEM symbol.
Even in memory mode, a new temperature can be taken provided
that the ready symbol
is shown.
To quit the memory mode, press the /mem button again.
LCD light
for easy nighttime reading
Changing the temperature scale
This thermometer is shipped with the Celsius temperature scale
activated. If you wish to switch to Fahrenheit ( °F ), proceed as
follows:
ø Turn on the thermometer.
( If it is already turned on, make sure it is not in memory mode.)
ø Press the /mem button and keep it pressed. Then press and
release the activation button to switch over to the «change
temperature scale» mode.
ø By pressing the activation button again, the Fahrenheit scale is
activated, «°F » is displayed on the LCD. Each further pressing
of the activation button toggles the scale between °C and °F.
ø Release the /mem button to return to the ready symbol .
The temperature stored in memory will automatically be converted
to the selected scale when displayed on the LCD.
6014126_WA_MN Seite 9 Montag, 12. November 2001 7:22 07