Philips MC10 - Manual (Page 18)

18
English
3140 115 27761
Clock/Timer
PROGRAM
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE REPEAT
BAND
PREV NEXT TUNING
DBB DSC
PRESET STOP PLAY•PAUSE iR SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
TIMER
ON•OFF
CD TIMER
SELECT
SOURCE
PROGRAM
Setting the clock
1 In standby, press CLOCK.
➜ The clock digits for the hours flash.
2 Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting TIMER
¶ The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
¶ During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER ON•OFF for more
than 2 seconds.
2 Turn VOLUME clockwise (or press SELECT
SOURCE) to select sound source.
3 Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
CD
or TUNER TUNER
is shown. The clock digits for the hours flash.
4 Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5 Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6 Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7 Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
¶ In standby or during playback, press TIMER
ON•OFF on the system once (TIMER on the
remote control).
➜ Display shows
TIMER if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
¶ Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence:
60, 45, 30,15,
SLEEP OFF, 60... if you have
selected a time. Once SLEEP is activated,
SLEEP
ON scrolls across the display at repeated
intervals.
¶ To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.
TUNER APE
SLEEP UX
SC INC. SURR
pg 001-021/MC10/37-Eng 12/8/00, 9:10 AM 18