Philips MC10 - Manual (Page 13)

13
English
3140 115 27761
Compact Disc
OPEN • CLOSE
SELECT
SOURCE
TIMER
ON • OFF
INTERACTIVE SOUND
STANDBY
ON
SHUFFLE REPEAT
BAND
PREV NEXT TUNING
DBB DSC
PRESET STOP PLAY•PAUSE iR SENSOR
VOLUME
INCREDIBLE SURR.
CLOCK
PROGRAM
CD PROGRAM
IMPORTANT:
The lens of the CD player should never be
touched.
X
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Select CD source.
2 Press OPEN•CLOSE on the top
of the system to open the CD
compartment.
➜ OPEN is displayed when you
open the CD compartment.
3 Insert a disc with the printed side
facing up and press down on OPEN•CLOSE
to close the CD door.
➜ READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
4 Press PLAY•PAUSE
2; (on the remote
control
2) to start playback.
➜ Current track number and elapsed playing
time of the track are displayed during disc
playback.
5 To interrupt playback press PLAY•PAUSE
2;
(on the remote control SIDE/
;). Press
PLAY•PAUSE
2; (on the remote control 2)
again to resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
6 To stop disc playback, press STOP 9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER or AUX.
– you select to standby.
– you press the tape deck PLAY
2
key.
Selecting a different track
¶ Press PREV ¡1 or NEXT 2™ on the system,
(on the remote control
¡ or ™) once or
repeatedly until the desired track number
appears in the display.
¶ If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press PLAY•PAUSE
2; (on the
remote control 2) to start playback.
Finding a passage within a track
1 Press and hold down on PREV ¡1 or NEXT
2™.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release PREV
¡1 or NEXT 2™.
➜ Normal playback continues.
Note:
– During a disc program or if SHUFFLE/ REPEAT
active, searching is only possible within the same
track.
pg 001-021/MC10/37-Eng 12/8/00, 9:10 AM 13