Philips HTS6500-37 - Manual (Page 28)

28
English
Disc Operations
(continued)
Programming disc tracks
(not for Picture CD/MP3)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks.
A Press PROGRAM on the remote
control.
The programming menu appears.
2
6
7
8
9
10
Exit Start Next
B Use the numeric keypad (0-9) to
enter a valid track/chapter number.
C Use WXST keys to move the cursor to
the next position.
If there are more than ten total program
tracks, select { Next } on the screen and
press OK (or press > on the remote
control) to access the next programming
page.
To remove the track/chapter from the
programming menu, select the track/
chapter and press OK.
D Once complete, select { Start } on the
screen and press OK to start playback.
Playback will start from the selected
track under the programmed sequence.
E To exit the program menu, select
{ Exit } in the menu and press OK.
Other playback features
for video discs (DVD/VCD/
SVCD)
Using the Disc Menu
Depending on the disc format, a menu
may appear on the TV screen once you
load the disc.
To select a playback feature or item
Use WXST keys or numeric keypad
(0-9) on the remote control, then press
OK to start playback.
To access or remove the menu
Press DISC MENU on the remote
control.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.