Philips HTS6500-37 - Manual (Page 25)

25
English
Getting Started
(continued)
TIPS: The underlined option is the factory default setting.
Press
W to go back to the previous menu item. Press SETUP to exit the menu.
Step 6: Setting the
SonoWave speakers
There are three parameters to adjust the
SonoWave speakers: Room Acoustics,
Speaker Distance and Listening Position.
You can adjust the SonoWave speaker
settings according to your room
environment and setup for optimum
performance.
A Press and hold SOUND on the
remote control to enter SonoWave
speaker settings mode.
B Use W X keys to select { ROOM
ACOUSTICS } and press OK.
To return to the main SonoWave
speaker settings selection, press S or T
key.
C Use W X keys to select the condition of
the room and press OK to confi rm.
{ HARD } for concrete/glass walls.
{ SOFT } for wooden walls.
D Use W X keys to select { SPEAKER
DISTANCE } and press OK.
FRONT R FRONT L
TV
SPEAKER DISTANCE
E Use W X keys to select the distance
between the two SonoWave speakers
and press OK to confi rm.
{ NEAR } for distance less than 1
meter (3’ 5”.)
{ DEFAULT } for distance between 1
meter (3’ 5”) to 2.5 meters (7’ 7”.)
{ FAR } for distance more than 2.5
meters (7’ 7”.)
F Use W X keys to select { LISTENING
POSITION } and press OK.
TV
FRONT R FRONT L
G Use W X keys to select the distance
between the listening position and the
SonoWave speakers and press OK to
confi rm.
{ NEAR } for distance less than 1.5
meters (4’ 7”.)
{ DEFAULT } for distance between 1.5
meters (4’ 7”) to 2.5 meters (7’ 7”.)
{ FAR } for distance more than 2.5
meters (7’ 7”.)
H The SonoWave speaker settings are now
completed and the system will exit the
setting automatically.