Philips MCM309R-37 - Manual (Page 16)

16
English
Basic Functions
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press STANDBY-ON/ECO POWER 2.
➜ The system will switch to the last selected
source.
● Press SOURCE on the front panel or CD,
USB, TUNER or DOCK on the remote
control.
➜ The system will switch to the selected source.
● Press LEFT OPEN • CLOSE or RIGHT
OPEN • CLOSE on the front panel (L
ç or
R çon the remote).
➜ The system will switch to the CD source.
Switching the system to Eco
Power Standby mode
● Press STANDBY-ON/ECO POWER 2 in
the active mode.
➜ The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
● If the system is in normal standby with clock
display, press and hold STANDBY-ON/ECO
POWER
2 for 3 seconds or more to switch
to Eco power standby or vice versa.
● The volume level (up to a maximum volume
level of 13), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Standby 30 minutes
after a CD has reached the end and no control
is operated.
Adjusting volume and sound
1
Press VOLUME -/+ (VOL +/- on the remote)
to decrease or increase the volume.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press DSC on the remote repeatedly to select
the desired sound effect: ROCK/ JAZZ/ POP/
CLASSIC.
3
Press DBB on the remote to switch bass
enhancement on or off.
➜ Display shows: DBB.
4
Press IS on the remote repeatedly.
➜ If activated, INCR SUR is displayed.
➜ If deactivated, IS OFF is displayed.
5
Press MUTE on the remote to interrupt sound
reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Dimming the display screen
●
Press DIM on the remote repeatedly to turn on
or off the dim function for the display screen.
DISC 2 DISC 4
USB DIRECT
pg001-033_MCM309R_37_Eng 2007.1.30, 9:58 16