Brinkmann ProSeries 4435 - Manual (Page 32)

31
Step 21
Remove two bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
table base, then firmly seat the
valve nozzle into the burner venturi.
Hold in place while you perform
Step 22.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.
Step 22
Place the bezel over the control
knob mounting stem and position
over holes in side burner base and
side burner valve assembly. Attach
with two bolts with spring washers
which come with valve. Then install
the side burner control knob onto
valve stem.
Step 23
Place side burner grate on side
burner.
Step 24
Attach side burner igniter lead wire
to the electrode as illustrated.
Side Burner Igniter
Lead
Electrode
Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Side
Burner
Control
Knob
Bezel