Philips ORD2100B-37 - Manual (Page 9)

9 EN
5 Other features
Set alarm timer
Set alarm
Note
• Make sure that you have set the clock correctly.
You can set two alarms to ring at different time.
Buzzer, FM radio, or your last listened audio in
the iPod/iPhone can be selected as alarm sound.
1
Press and hold AL1/AL2 for more than
two seconds to activate alarm setting
mode.
» The current alarm time (if set) is
displayed.
» The hour digits and alarm icon begin
to blink.
2
Rotate the knob to set the hour.
3
Press the knob to confirm.
» The minute digits blink.
4
Repeat steps 2-3 to set minute, select an
alarm source ([BUZZ],[DOCK] or [FM]),
and adjust the alarm volume.
» The corresponding alarm icon lights up.
Tip
•
If iPod/iPhone is selected as alarm source, but no iPod/
iPhone is connected, the device switches to buzzer
source instead.
Note
• For the alarm(s) set through the device, you can also
select the nature sounds stored in the HomeStudio
app as alarm sound.
•
The gentle wake-up function is available for [DOCK]
and [FM]source.
Activate/deactivate the alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 repeatedly to select
[ON]or [OFF]to activate or deactivate the
alarm timer.
» AL1 or AL2 appears if alarm timer is
on and disappears if it is off.
2 sec.
AL1
AL1
AL1
AL1
AL1